Omcan IC-CN-0089S Instruction Manual page 16

Troubleshooting
Too slow in ice making.
Too much noise.
ERROR CODES
Code
E01
E03
E04
E05
E06
E07
E08
E09
E10
E13
The condenser or air filter is dirty.
High ambient temperature.
Poor ventilation.
Water temperature is too high.
The ice machine is not placed in a
leveled foundation or the ice maker
is not leveled.
Comments
Water curtain or ice full switch
fault.
Ice harvest overtime.
High temp. fault.
Water shortage fault.
Over-pressure fault.
Cond. temp. sensor open circuit
fault.
Cond. temp. sensor short circuit
fault.
Water temp. sensor open circuit
fault.
Water temp. sensor short circuit
fault.
Water level control fault.
16
Clean the condenser and filter
screen.
Normal working temperature range
of 24°C.
Check the environment around the
ice machine.
Check the water supply
temperature of 5-35°C.
Level the ice machine.
Work Mode
Sleeping mode and recover after
the water curtain is reset.
Sleeping mode.
Sleeping mode.
Sleeping mode and retry every 30
mins.
Sleeping mode.
Keep working.
Keep working.
Keep working.
Keep working.
Sleeping mode.