Table of Contents
Advertisement
If you enter a wrong password three times, the message "System will be
shut down" appears. Press Enter to shut down your computer, and after
10 seconds, press the power button to turn it on again.
If Password on Boot is enabled, the system will require a password when the
computer is turned on.
Setting Password
1.
In the Security menu of the Setup Utility, select Set Password and press Enter.
2.
Type your password (up to eight characters), and press Enter.
3.
Type the same password again, and press Enter twice.
4.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
5.
Confirm OK is highlighted and press Enter. The system restarts.
Changing Password
1.
In the Security menu of the Setup Utility, select Set Password and press Enter.
2.
Type your current password, and press Enter.
3.
Type your new password, and press Enter.
4.
Type your new password again, and press Enter twice.
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
6.
Confirm OK is highlighted and press Enter. The system restarts.
Deleting Password
1.
In the Security menu of the Setup Utility, select Set Password and press Enter.
2.
Type your current password, and press Enter.
3.
Without typing any characters, press Enter.
4.
Press Enter twice.
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter
6.
Confirm OK is highlighted and press Enter. The system restarts.
6
6-5
Advertisement
Table of Contents
