Table of Contents
Advertisement
8.
Tighten the screws.
9.
Insert the battery pack.
10. Turn your computer over and connect the AC adapter.
11. Turn on your computer.
12. If you see the message Press F1 to Continue, Del. to Load CMOS defaults. It
may take approximately one minute for this message to appear.
13. Press the Delete key, and Windows starts up.
14. Click start – Control Panel.
15. Click Date, Time, Language, and Regional Options in Category view; then, click
on Change the date and time string.
16. Set date and time; then, click OK.
17. Close the Control Panel window.
A-7
Advertisement
Table of Contents
