Sharp PC-MC20 Series Operation Manual page 95

8. Follow the on-screen instructions.
After completing the installation of the SharpSync application, ISYNC
folder, autozip.run, Autozip.bak and setup.exe may be automatically
installed in the destination drive of your MC series. Do not delete the
folder and files in order to keep SharpSync software working.
• The preset sync target files are doc, xls, pdf, ppt, bmp, avi and jpg.
You can add other file extensions and also remove the above
extensions. (Refer to the Adding/Removing Sync Target File section
later in this chapter.)
• See the Help menu of the SharpSync for more information.
• After setting up the synchronization, the synchronized files will be
recognized on your host computer whenever connecting your MC
series with your host computer.
• When installing other applications or software into your MC series, be
sure to directly install it. You cannot install through your host
computer.
1.
2.
3.
Adding Sync Set
After installing the SharpSync application and setting up the first synchronization, you
can add another sync set.
7
Confirm that your MC series is connected with your host computer and
the DirectHD status indicator is lit.
1. Double-click the SharpSync icon on your host computer's desktop.
2. Click Add New Set button.
3. Follow the instructions on the screen.
7-8
Turn on your MC series.
Insert the CD-ROM into the optical drive of your MC series.
Follow the on-screen instructions.