Table of Contents
Advertisement
Connecting WEP configured network
Wireless communication has security issues. Some networks are configured with
WEP (Wired Equivalent Privacy) keys or encryption keys to protect the transmitted
data. To connect into the WEP configured network, follow the steps below.
1.
Right-click Wireless Network Connection icon (
View Available Wireless Networks.
2.
Select the network you want to connect in Available wireless networks of
Wireless Network Connection dialog box.
3.
Type its encryption key in Network key field, type it again to confirm and click
Connect button.
• When you select a network that is not configured for encryption
settings in the step 2, the caution message appears. If you agree to
connect to the unsecured network, check the box of Allow me to
connect to the selected wireless network, even though it is not secure.
• When the key index of your computer is different from that of the
5
network, you cannot access the network. Set the same key index with
the following steps. Note that some access points have the key index
options 0 through 3. Refer to the table below for matching.
1. Open the Wireless Network Connection Properties dialog box.
2. Select the network you want to access in Preferred networks section
3. Confirm the box of Data encryption (WEP enabled) is checked,
5-12
(Refer to the steps in Communicating with Other Computers
section.)
and click Properties button.
uncheck the box of The key is provided for me automatically and
set the key index.
Key index matching table
Access Point 1
1
2
3
4
(ex. When your access point type is "Access Point 2"
and its key index is set to 0, set 1 to the key index of
your computer.)
) on the taskbar and click
2
Access Point
Your computer
0
1
2
3
1
2
3
4
Advertisement
Table of Contents
