Synchronizing Mc Series With Host Computer - Sharp PC-MC20 Series Operation Manual

Synchronizing MC Series with Host Computer

You can synchronize files or folders on your MC series and on your host computer. You
need to install the SharpSync application onto your host computer for synchronizing.
During data communication, set the time of the MC series and the host
computer synchronized. When you update the file, the updated time is
recorded. If the time in the host computer is not the same as the time in
the MC series, you will not be able to properly manage the files by the
modification date.
Supporting Operating System
The SharpSync application supports the following operating systems:
•
Microsoft Windows XP Home Edition/ Microsoft Windows XP Professional
(hereafter called Windows XP)
•
Microsoft Windows 2000 Professional (hereafter called Windows 2000)
Installing SharpSync Application and Setting Up Synchronization
The SharpSync application is stored on the provided Product Recovery CD-ROM
Disk3.
Be sure to install the application on your host computer.
1. Connect your MC series and your host computer. (Refer to the Connecting MC
series and Host Computer section in this chapter.)
2. Insert the provided Product Recovery CD-ROM Disk3 into the optical drive of
your host computer.
3. In My Computer, double-click the CD icon to open the CD-ROM.
4. Double-click the SHPSYNC folder and then the setup icon to start the application
installation.
5. Follow the instructions on the screen. When the installation process is
successfully completed, the Enable SharpSync Drive wizard will start.
6. Click Next.
7. Select a destination drive of your MC series for the synchronization and then
click Next.
7
7-7