Table of Contents
Advertisement
2.
Click start on your host computer.
3.
Click All Programs (on Windows XP) or Program (on Windows 2000) or
Programs (on Window Me) – DirectHD Utility– Password Utility. The
Password Utility window will appear.
4.
Type the current password in the Password box and click OK.
The password will be cancelled and the MC series will be recognized as an
external hard disk of your host computer.
In some cases, an alert box may appear. This is because once the
password is cancelled, the USB device is stopped and then, the MC series
is connected. This causes no matters.
Deleting Password
When your host computer runs Windows XP or Windows 2000
Delete the password of the MC series in the Setup Utility. (See Chapter 6.)
When your host computer runs Windows Me
1.
Cancel the password. (Refer to the previous section.)
2.
Stop the device. (Refer to the next section.)
3.
Remove the DirectHD cable from your computer.
4.
Delete the user password of the MV series in the Setup Utility. (See Chapter 6.)
Deletion of the user password without canceling in advance will cause
the MC series to be recognized as a removable disk the next time you
access it using DirectHD function. To allow your MC series to be
recognized as an external hard disk, follow these steps.
1. Connect MC series to your host computer.
2.
3.
4.
5.
Open the Password Utility and click Cancel.
Stop the device.
Remove the DirectHD cable from your host computer.
Connect it again.
7
7-5
Advertisement
Table of Contents
