Wireless Card; Removing The Wireless Card - Dell OptiPlex Small Form Factor Plus 7010 Owner's Manual

Wireless card

Removing the wireless card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch hard drive
5. Remove the 3.5-inch hard drive
6. Remove the disk-drive
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
Steps
1. Remove the (M2x3.5) screw that secures the wireless card bracket to the system board.
2. Slide and lift the wireless card bracket away from the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide and remove the wireless card from the connector on the system board.
Before working inside your
if applicable.
if applicable.
cage.
computer.
Removing and installing Customer Replaceable Units (CRUs) 61