Steps
1. Push the securing tab on the graphics-card support bracket and rotate the bracket to move it away from the chassis.
2. Push and hold the securing tab on the graphics-card slot and lift the graphics card from the graphics-card slot
Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the graphics card and provides a visual representation of the installation procedure.
64
Removing and installing Customer Replaceable Units (CRUs)
Need help?
Do you have a question about the OptiPlex Small Form Factor Plus 7010 and is the answer not in the manual?