Dell OptiPlex Small Form Factor Plus 7010 Owner's Manual page 116

Table 37. System setup options—System Management menu (continued)
System Management
Auto on Time
SERR Messages
First Power On Date
Diagnostics
Power-on-Self-Test Automatic Recovery
Table 38. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection
Numlock LED
Enable Numlock LED
Device Configuration Hotkey Access
Device Configuration Hotkey Access
Table 39. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Warning and Errors
Fastboot
Extend BIOS POST Time
Table 40. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
VT for Direct I/O
116 BIOS setup
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Enable or disable SERR messages.
By default, the option is enabled.
The Set Ownership Date is disabled by default.
The option OS Agent Requests
The option is enabled by default.
Enable or disable the keyboard error detection.
By default, the option is enabled.
Enable or disable Numlock LED.
By default, the option is enabled.
Enable or disable users to access device configuration by using hotkeys.
By default, the option is enabled.
Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Enable to set the speed of the boot process.
By default, the option is enabled.
Set the BIOS POST time.
By default, the 0 seconds option is enabled.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology.
By default, the option is enabled.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology for
Direct I/O.
By default, the option is enabled.