Installing The Wireless Card - Dell OptiPlex Small Form Factor Plus 7010 Owner's Manual

Installing the wireless card

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.
Steps
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card of your computer.
CONNECTORS ON THE WIRELESS CARD
Main (white triangle)
Auxiliary (black triangle)
2. Slide and place the wireless-card bracket on the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot.
4. Slide the wireless card at an angle into the wireless-card slot.
5. Replace the screw (M2x3.5) to secure the wireless card to the system board.
Next steps
1. Install the disk-drive cage.
2. Install the 3.5-inch hard drive
62 Removing and installing Customer Replaceable Units (CRUs)
if applicable.
ANTENNA-CABLE COLOR
White
Black