Installing The Side Cover; Front Bezel; Removing The Front Bezel - Dell OptiPlex Small Form Factor Plus 7010 Owner's Manual

Installing the side cover

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the side cover and provides a visual representation of the installation procedure.
Steps
1. Align the tabs on the side cover with the slots on the chassis.
2. Slide the side cover towards the front of the computer until you hear the release latch click.
Next steps
1. Follow the procedure in

Front bezel

Removing the front bezel

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the front bezel and provides a visual representation of the removal procedure.
40 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.