Features Setting Mode; On Timer And Off Timer - Sharp 32JF-77H Operation Manual

Features Setting Mode

In this mode you can set the ON-TIMER and OFF-TIMER, set the CHILD LOCK, activate or deactivate the interactive
HELP, set the Postcode Secuity and view the all functions implemented in your TV set demonstration.
Press the MENU button b twice to see the MAIN Menu.
1.
2. Press the YELLOW button
ON TIMER
The ON-Timer is used to programme switching ON the TV set during the 24 hours of the day.
In order to be able to run this function, it is essential to adjust the "CURRENT TIME".
If necessary, repeat steps (1. ~ 2.) to see the Timers Menu.
Press the Cursor UP/DOWN buttons E/ F
3.
"CURENT TIME".
The red point mark indicates the selected item.
Automatic TIME adjustment: If a programme with teletext is being
received, the "CURRENT TIME" can be adjusted automatically with
that signal's clock.
To synchronize "CURRENT TIME", press Text/Mix/Picture button
a/b/ Q.
*
Important: If a signal via satellite is being received, or if correct time
cannot be obtained, the time will have to be adjusted manually.
Manual TIME adjustment: Press the Cursor LEFT/RIGHT buttons
Press the Cursor UP/DOWN buttons E/ F to select "PROGRAMMED SWITCH ON AT". The red point mark
4.
indicates the selected item.
5. Press the Cursor LEFT/RIGHT buttons
To cancel the switch on, select
Press the MENU button b to close the ON TIMER Menu.
6.
7. Press the Stand-by button (æ TV) on the remote control to put the TV set into Stand-by Mode.
When the preset time is reached, the TV set turns ON and a picture appears on the screen.
Note:
As a safety precaution, in the case of nobody being home when the television switches on automatically, the
television will return to Stand-by Mode after 120 minutes; if it is to continue to run any of the remote control
function buttons should be pressed.
In the event of a power cut, disconnection from the plug or television switch, all the data on the ON TIMER
will be cancelled.
OFF TIMER
The OFF-TIMER is used to programme switching the TV set to Stand-by mode, after the set length of time has passed.
If necessary, repeat steps (1. ~ 2.) to see the Timers Menu.
Press the Cursor UP/DOWN buttons E/ F to select
3.
"OFF TIMER STATUS".
The red point mark indicates the selected item.
4. Press the Cursor LEFT/RIGHT buttons
desired period (05 ~ 180 minutes).
To cancel the OFF-TIMER, select
Press the MENU button b to close the OFF -TIMER Menu.
5.
Note:
The OFF TIMER data will be cancelled if you turn off the TV
by the Stand-by button (æ TV) on the remote control or
with the Main power button (®) on the TV set.
to see the Timers Menu.
to select
C I
/ to adjust the switch on.
.
C I
/ to select the
.
29
MAIN Menu
Timers Menu
CURRENT TIME
PROGRAMMED SWITCH ON AT
OFF TIMER STATUS
HELP
SECURITY SECURITY DEMO DEMO
C I
/ to adjust the "CURRENT TIME" manually.
Timers Menu
CURRENT TIME
PROGRAMMED SWITCH ON AT
OFF TIMER STATUS
HELP
SECURITY SECURITY DEMO
DEMO
YELLOW
- - : - -
- - - -
ON
AV-LINK AV-LINK
TIMERS TIMERS
- - : - -
- - - -
ON
AV-LINK
TIMERS TIMERS AV-LINK