Wide Mode Menu
With this menu you can select the width of the picture:
AUTO, PANORAMA, FULL, NORMAL, ZOOM 14:9 or CINEMA, by
pressing the Wide Mode Button
Each time you press the Wide Mode Button, the width of the picture
changes as indicated:
When you Select: PANORAMA, ZOOM 14:9 or CINEMA, 4 options
appear on the screen:
V-SCROLL, V-SIZE, NORMAL and EXIT.
1. Press the Cursor UP/DOWN buttons E/ F to select
V-SCROLL or V-SIZE.
The red point mark indicates the selected parameter.
V-SCROLL: Press the Cursor LEFT/RIGHT buttons
adjust the Vertical SCROLL (DOWN / UP).
V-SIZE: Press the Cursor LEFT/RIGHT buttons
the Vertical SIZE (SMALL / LARGE).
NORMAL: Press the YELLOW button
the Vertical SCROLL and Vertical SIZE.
EXIT: Press the BLUE button
AUTO mode (VPS code)
The VPS signal is sent by some broadcasting stations with information of the original size. When the TV is in
AUTO mode and receives the VPS signal, it changes the size automatically as indicated below:
When the TV is receiving VPS code 16:9 the TV selects CINEMA automatically.
When the TV is receiving VPS code 14:9 the TV selects ZOOM 14:9 automatically.
When the TV is receiving VPS code 4:3 the TV selects PANORAMA automatically.
When the TV does NOT receive VPS code the TV selects PANORAMA automatically.
External source: When you are watching the TV-set through the Euro-SCART AV-1 or AV-2 terminals and it receives
information of 16:9 format (through the audio-video control pin) the TV selects FULL automatically.
if you wish to normalize
to quit the menu.
WIDE MODE Button