Download  Print this page

Sharp 32JF-77H Operation Manual Page 19

Sharp 32jf-77h: operation manual.
Hide thumbs

Advertisement

Table of Contents
1. Press the Cursor UP/DOWN buttons E/ F to select:
COMB FILTER, NOISE REDUCTION, DIGITAL SCAN, D.GAMMA,
SVM, LTI/CTI or BLACK STRETCHER.
2. Press the Cursor LEFT/RIGHT buttons
AUTO / etc.
Select COMB FILTER to reduce the colour interference in picture
with fine details and the picture gets sharper (ON / OFF).
Select NOISE REDUCTION to reduce the noise when receiving a
weak signal and improve the picture quality (OFF, MEDIUM, HIGH or
AUTO).
Select DIGITAL SCAN to reduce picture flicker (NORMAL 100Hz, DIGITAL 100Hz or PROGRESSIVE 50Hz).
Select D. GAMMA to increase the brightness of dark part of picture (OFF, LOW, MEDIUM or HIGH).
Select SVM (Scan Velocity Modulator) to change the resolution of the picture (ON or OFF).
Select LTI/CTI (Luminance / Chrominance Transient Improvement) to improve the Luminance and Chrominance Tran-
sient of the picture (ON / OFF).
Select BLACK STRETCHER to connect or disconnect (ON/OFF) the Dynamic Compensation in dark area of the pic-
ture.
In this menu you can switch to the following menus:
Press the RED button
Press the YELLOW button
Press the BLUE button
Press the Help button
3. Press the MENU button b to close the 100 Hz menu.
ADVANCED menu
1. Press the Cursor UP/DOWN buttons E/ F to select a para-
meter from the list: OSD contrast, Tint control, NTSC Hue control,
Rotation or ECO mode.
The red point mark indicates the selected parameter.
2. Press the Cursor LEFT/RIGHT buttons
quality to your liking.
Select OSD contrast to adjust the contrast level of the On Screen
Display menus.
Select Tint control to adjust your desired skin colour (Cool or Warm).
Select NTSC Hue control to adjust the skin colour (Green or Red)
during NTSC signal reception.
Select Rotation to rotate the picture until the lines are perfectly horizontal.
Select ECO mode "On" to attenuate the contrast in the excessively white areas of the picture.
In this menu you can switch to the following menus:
Press the RED button
Press the GREEN button
Press the BLUE button
Press the Help button
3. Press the MENU button b to close the ADVANCED Menu
100 Hz menu
C
I
/
to select ON / OFF /
to see the LEVELS menu.
to see the ADVANCED menu.
to see the EFFECTS menu.
to see the Interactive Help.
C
I
/
to adjust picture
to see the LEVELS menu.
to see the 100 HZ menu.
to see the EFFECTS menu.
to see the Interactive Help.
100 Hz menu
COMB FILTER
NOISE REDUCTION
DIGITAL SCAN
D.GAMMA
SVM
LTI / CTI
BLACK STRETCHER
LEVELS
LEVELS
ADVANCED Menu
Cool
Green
LEVELS
LEVELS
18
OFF
ON
NORMAL
ON
MED
OFF
OFF
ADVANCED
EFFECTS
EFFECTS
100 Hz
100 Hz
ADVANCED
OSD CONTRAST
TINT CONTROL
Warm
NTSC HUE CONTROL
Red
ROTATION
ECO MODE
OFF
EFFECTS
EFFECTS
100 Hz
100 Hz
ADVANCED
ADVANCED

Advertisement

Table of Contents

   Related Manuals for Sharp 32JF-77H

Comments to this Manuals

Symbols: 0
Latest comments: