Sharp 32JF-77H Operation Manual page 20

1. Press the Cursor UP/DOWN buttons E/ F to select a
parameter from the list:
SCAN PROGRAMMES or SCOPE SIGNAL.
The red point mark indicates the selected parameter.
2. Press the BLUE button
SCAN PROGRAMMES
In this mode, the TV displays 9 programmes simultaneously in still
mode: 4 programmes after and 4 programmes before from the current
program, as indicated in the drawing.
To select a programme (e.g. PR10) press the MENU button b when
the box is in blue background.
Pr10
Note: the channels that are in SKIP mode cannot be seen in
SCAN Mode.
In this mode, you can enlarge the picture and using the
UP/DOWN/LEFT/RIGHT buttons E/ F/
the required area of the picture.
Press the MENU button b or BLUE button
STILL mode (Frozen picture)
1. Press the MENU button b once to see the QUICK Menu.
2. Press the BLUE button
In this mode, the TV displays two windows, the main window in still
mode and the small window in normal mode.
Each time the BLUE button is pressed, the frozen picture is
refreshed.
3. Press the BLUE button b to quit the Menu.
EFFECTS menu
to activate the function.
SCOPE SIGNAL
C I
/ you can move to
to restore the picture.
to freeze the picture.
EFFECTS Menu
LEVELS LEVELS
SCAN PROGRAMMES
SCOPE SIGNAL
QUICK Menu
STILL Mode
MENU
19
SCAN PROGRAMMES
SCOPE SIGNAL
ADVANCED GO! GO!
100 Hz 100 Hz ADVANCED
BLUE
CURRENT
PROGRAM
EXIT
EXIT
BLUE
BLUE