Sharp 32JF-77H Operation Manual page 36

In this menu you can set a late start and stop time for a recording.
Select the channel you wish to record by using the 0~9 digit or E/ F buttons.
1.
2. Press the MENU button
3. Press the YELLOW button
4. Press the BLUE button
5. Press the BLUE button
Menu.
TIMER PROGRAMMING Menu
Press the Cursor UP/DOWN buttons E/ F to select:
6.
DEVICE, DATE, START, END, MODE and SPEED
DEVICE: to select the controller set (VCR or TV) [ ] by using the
Cursor LEFT/RIGHT buttons
DATE: to enter the recording date using the number buttons.
Enter 2 digits for the date, then 2 for the month. E.g. For July 9th,
press 0 9 (9th), then 0 7 (July).
START: to set a late start time. Enter 2 digits for the hour and 2
for the minutes for the START.
END: to set a late stop time. Enter 2 digits for the hour and 2 for
the minutes for the END.
MODE: if you want to make additional recordings at the same
time each day or week, use
WEEKLY.
SPEED: to change recording speed between Standard-Play (SP)
and Long-Play (LP), by using
Standard-Play gives the best picture quality; Long-Play provides
the longest recording time.
For more information, press the Help button
7. Press the BLUE button «PROG. VCR» to memorize the TIMER
8. Now the VCR should be manually set for Timer Mode. Refer to
your VCR operation manual for further information.
9. Press the MENU button
About Device
«Device VCR»: preferably select «Device VCR» to memorize the TIMER PROGRAMMING data in video
memory buffer.
When you select «Device VCR», Mode (UNIQUE/DAILY/WEEKLY) and Speed (SP/LP) can be changed only if the
video has these functions available.
«Device TV»: when the video cannot accept the TIMER PROGRAMMING data (i.e. when the video has the
memory buffer full), select «Device TV» to memorize the TIMER PROGRAMMING data in TV memory buffer.
When you select «Device TV», the late recording only can be applied within the next 24 hours.
When you select «Device TV», Mode (Unique) and Speed (SP) cannot be changed.
When you select «Device TV», in the event of a power cut, disconnection from the plug or if you turn off the TV by
the Main power button (® ) on the TV set, the TIMER PROGRAMMING data will be cancelled; In order to keep
the programmed data, use Stand-by button (æ TV) on the remote control to switch off the TV set.
AV LINK -TIMER PROGRAMMING-
twice to see the MAIN Menu.
to see the Timers Menu.
Timers Menu
to see the AV LINK Menu.
AV LINK Menu
to see the TIMER PROGRAMMING
C I
/ .
C I
/ to select UNIQUE, DAILY or
C I
/ buttons.
.
to clear the on-screen display.
MAIN Menu
Timers Menu
SECURITY
SECURITY
AV LINK Menu
STOP STOP
RED
TIMER PROGRAMMING Menu
35
YELLOW
CURRENT TIME
PROGRAMMED SWITCH ON AT
- - : - -
OFF TIMER STATUS
- - - -
HELP
ON
DEMO DEMO TIMERS AV-LINK AV-LINK
TIMERS
BLUE
VCR DETECTED
START START PRESETS PRESETS TIMER TIMER
GREEN BLUE
YELLOW
DEVICE
VCR
DATE
START
END
MODE
UNIQUE
SPEED
SP
AV LINK PROG. VCR PROG. VCR
AV LINK
BLUE