Sharp 32JF-77H Operation Manual page 32

Sharp 32jf-77h: operation manual
Table of Contents

Advertisement

LOCK PROGRAMME Menu
Select this option to protect the access to separate programmes.
If necessary, repeat steps (1. ~ 4. on page 30).
Press the Cursor UP/DOWN buttons E/ F to select
5.
"PROGRAMME". The red point mark indicates the selected item.
6.
Select the programme channel number you want to set with the
Cursor LEFT/RIGHT buttons
Press the Cursor UP/DOWN buttons E/ F to select "TYPE
7.
OF PROTECTION".
The red point mark indicates the selected item.
8.
Press the Cursor LEFT/RIGHT buttons
TIMER.
NONE: To cancel the protection from the selected programme.
ALWAYS: To protect the access from the selected programme throughout the day.
TIMER: The access to the selected programme will be protected during the programmed period.
If you have selected TIMER, press the Cursor UP/DOWN buttons E/ F to select START or END:
9.
START: To enter the hour and minutes, from the beginning of protection, with the Cursor LEFT/RIGHT buttons
END: To enter the hour and minutes, to the end of protection, with the Cursor LEFT/RIGHT buttons
10. Press the MENU button
From this time forward, whenever the protection conditions are met, the screen will be blocked and the «LOCKED
MODE» message will be displayed.
Press any number key on the remote control to unlock the TV.
Note:
Since the "key" for unlocking the TV is the remote control, make sure you do not misplace it.
CLEAR LOCK Menu
This option enables you to erase all the adjustments made to the
CHILD-LOCK function.
If necessary, repeat steps (1. ~ 4. on page 30).
5.
Press the BLUE button
the child lock settings.
Use the CLEAR LOCK to cancel any previously set CHILD LOCK programmes to avoid malfunction when a new
program is set.
Note:
In order for the timed protection to function correctly, the internal TV clock must be set at the right time.
To check the time setting see section -Automatic or Manual time adjustment- (page 29).
C
I
/
.
C
I
/
to select the desired period you wish locked: NONE ALWAYS or
to close the LOCK PROGRAMME Menu.
to confirm that you want to erase
LOCK PROGRAMME Menu
POSTCODE
POSTCODE
CLEAR LOCK Menu
Press the BLUE button to clear all the child lock system
POSTCODE
POSTCODE
31
PROGRAMME
07
TYPE OF PROTECTION
ALWAYS
START
END
LOCK ALL
LOCK ALL
LOCK PROGRAMME
LOCK PROGRAMME
CLEAR LOCK
CLEAR LOCK
C
I
/
.
LOCK ALL
LOCK PROGRAMME
LOCK PROGRAMME
CLEAR LOCK
CLEAR LOCK
LOCK ALL
BLUE
C
I
/
.

Advertisement

Table of Contents
loading

Table of Contents