Table of Contents
Advertisement
Features setting mode
In this mode you can set the ON-TIMER and OFF-TIMER, set the CHILD LOCK, activate or deactivate the interactive
HELP, view the all functions implemented in your TV set demonstration and set the Post code.
Press the MENU button G to see the MAIN Menu.
1.
2.
Press the YELLOW button
The On-Timer is used to programme switching ON the TV set during
the 24 hours of the day.
In order to be able to run this function, it is essential to adjust the
current time
3.
Press the Cursor UP/DOWN buttons
"Current time". The red point mark indicates the selected item.
Automatic TIME adjustment: If a programme with teletext is being
received, the "Current time" can be adjusted automatically with that
signal's clock.
To synchronize "Current time", press Text/Mix/Image button a/b/I.
*
Important: If a signal via satellite is being received, or if correct time
cannot be obtained, the time will have to be adjusted manually.
Manual time adjustment: Press the Cursor LEFT/RIGHT buttons
4.
Press the Cursor UP/DOWN buttons
the selected item.
5.
Press the Cursor LEFT/RIGHT buttons
To cancel the switch on, select
Press the MENU button G to close the ON TIMER Menu.
6.
Press the Stand-by button ( æ TV) on the remote control to put the TV set into Stand-by Mode.
7.
When the preset time is reached, the TV set turns ON and a picture appears on the screen.
As a safety precaution, in the case of nobody being home when the television switches on automatically, the television
will disconnect itself after 120 minutes; if it is to continue to run, any button on the remote control functions should be
pressed.
Note: In the event of a power cut, disconnection from the plug or television switch, all the data on the ON TIMER will be
cancelled.
The OFF-Timer is used to programme switching the TV set to Stand-by
mode, after the set length of time has passed.
If necessary, repeat steps (1. ~ 2.) to see the Timer Menu.
3.
Press the Cursor UP/DOWN buttons
timer status". The red point mark indicates the selected item.
4.
Press the Cursor LEFT/RIGHT buttons
period 05 (180 minutes).
To cancel the OFF-Timer, select
Press the MENU button G to close the OFF -TIMER Menu.
5.
Note: The off timer data will be cancelled if you turn off the TV by the
Stand-by button ( æ TV) on the remote control or with the Main power
button (®) on the TV set.
to see the Timer Menu.
ON-TIMER
E
F
/
E
F
/
to select "Programmed switch on at". The red point mark indicates
C
I
/
to adjust the switch on.
.
OFF -TIMER
E
F
/
C
I
/
to select the desired
.
MAIN Menu
TIMER Menu
to select
C
I
/
to adjust the "Current time" manually.
TIMER Menu
to select "Off
19
Advertisement
Table of Contents
