Sharp 32JF-77H Operation Manual page 29

Stereo and Audio Input Select menus
1. Press the MENU button
2. Press the GREEN button
Audio EFFECTS Menu
3. Press the BLUE button
Press the Cursor UP/DOWN buttons E/ F to select:
4.
SPEAKERS MATRIX, HEADPHONES MATRIX, AV MATRIX [ ] or
IDENTIFICATION.
The red point mark indicates the selected item.
5. Press the Cursor LEFT/RIGHT buttons
Select SPEAKERS MATRIX to change the sound mode in the
speakers.
Select HEADPHONES MATRIX to change the sound mode in the
headphones.
Select AV MATRIX to change the sound mode in the audio output of
the external connector (AV-1/AV-2).
Select IDENTIFICATION to activate (ON) or deactivate (OFF) the
automatic Identification of audio system of the current program [ ].
6. Press the YELLOW button
watching the TV-set through the external sources.
Audio INPUT SELECT Menu
7. Press the Cursor LEFT/RIGHT buttons / to select the audio
input source:
ANALOG INPUT [ ], DIGITAL INPUT [ ] or AUTO DETECTION [ ].
8. Press the MENU button to close the STEREO Menu.
About MATRIX: Depending on the sound transmission the sound reproduction can be chosen in the STEREO Menu.
In this menu you can select a sound mode to the speakers, another to the headphones and another to the external connectors (AV-1/AV-2).
When the TV set is receiving a STEREO programme, the TV selects STEREO automatically, and you can change:
When the TV is receiving a BILINGUAL programme, the TV selects DUAL CHANNEL A automatically, and you can change:
When the TV set is receiving a MONO NICAM programme, the TV set selects MONO NICAM automatically, and you can change:
When the TV is receiving a MONO FM programme, the TV set selects MONO automatically but the sound mode cannot be change.
About IDENTIFICATION
IDENTIFICATION ON: The TV automatically identifies the received audio system MONO FM, STEREO or DUAL SIGNAL.
IDENTIFICATION OFF: Disqualifies the automatic identification of the audio system and forces the sound into MONO FM.
This mode can be convenient when the level of the signal received is extremely weak. This function is independent for every program.
ANALOG INPUT: Select this option when the TV is receiving an analog audio signal through the Aerial, Euro-SCART, AV-1, AV-2, Front A/V
or S-Video terminals.
DIGITAL INPUT: Select this option when the TV is receiving a digital audio signal through the DIGITAL AUDIO INPUT terminal placed on
rear TV (RCA connector). Use this digital audio input to connect a set with digital audio output, for example a DVD, a DAT or a CD.
AUTO DETECTION: Select this option for TV identifying automatically the audio input source (analog or digital).
twice to see the MAIN Menu.
to see the Audio EFFECTS Menu.
to see the STEREO Menu.
STEREO Menu
C I
/ to change.
to see the Audio INPUT SELECT Menu. This menu is available only when you are
STEREO
DUAL CHANNEL A DUAL CHANNEL B
MONO NICAM
MAIN Menu
Audio EFFECTS Menu
LEVELS LEVELS
STEREO Menu
SPEAKERS MATRIX
AV MATRIX
LEVELS
LEVELS
Audio INPUT SELECT Menu
LEVELS LEVELS
MONO
DUAL CHANNEL A B
MONO
28
GREEN
AUDIO MODE
BYPASS
NORMALIZER STEREO
NORMALIZER INPUT SELECT INPUT SELECT STEREO
BLUE
STEREO
HEADPHONES MATRIX
STEREO
STEREO
IDENTIFICATION
ON
EFFECTS STEREO
EFFECTS INPUT SELECT INPUT SELECT STEREO
YELLOW
INPUT SELECT
AUTO DETECTION
EFFECTS STEREO
EFFECTS INPUT SELECT INPUT SELECT STEREO
MONO