Channel selector buttons
Select the programme channel number you want to see, using the
channel selector buttons E/ F.
As you press these buttons, a list of channels appears.
Press the E/ F again to select another channel.
The channels that are in SKIP mode cannot be seen with this
buttons. Use numerical buttons to display these channels.
Single/Double entry button
This button selects between one or two digit channel number entry.
0~9 digit buttons
You can select channels by pressing the 0 * 9 digit buttons on the remote control.
For single and double-digit entry see section B above.
Back flash button
Press this button to switch the currently viewed channel to the previously viewed channel, and vice versa.
This function is only available in programme channel selection mode.
I.e. not when AV terminals are in use.