Table of Contents
Advertisement
BASIC SETTING
Automatic door opening
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press
3.
seconds.
The display shows Hxx.
a
The display shows
a
Cleaning and servicing
Cleaning and servicing
To keep your appliance working efficiently for a long time, it
Cleaning and servicing
is important to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine may result in harm
●
to health.
Never use detergents containing chlorine.
●
Remove any coarse soiling in the interior with a damp
1.
cloth.
Add detergent to the detergent dispenser.
2.
Select the programme with the highest temperature.
3.
"Start the programme without tableware." → Page 22
4.
Machine Care
Deposits, e.g. from remnants of food and limescale, can
cause your appliance to malfunction. To avoid such faults
and reduce odours, we recommend cleaning your appliance
at regular intervals.
Machine Care combined with machine care products and
machine cleaners is the right programme for the care of
your appliance.
PHASE
REMOVAL OF
1
Grease and limescale
DISPLAY TEXT
o02
1
rE
for 3
.
SELECTION
o00 - o02
Start with
YES
Confirm with
Press
4.
required setting.
Press
5.
value.
You can change several settings.
To save the settings, press
6.
Close the appliance door.
7.
Cleaning products
Only use suitable cleaning products to clean your appliance.
→ "Safe use", Page 8
Tips on appliance care
Follow the tips on appliance care to make sure your appli-
ance functions properly at all times.
ACTION
Wipe the door seals, the
front of the dishwasher and
the control panel regularly
using a damp cloth and
washing-up liquid.
If the appliance is not going
to be used for a while, leave
the door slightly ajar.
Machine Care is a programme which removes various de-
posits in one washing cycle. Cleaning takes place in two
phases:
DETERGENT
Liquid machine care product or ma-
chine descaler in powder form.
DESCRIPTION
Activate or deactivate automatic opening of
the appliance door during the drying phase.
If the function has been activated, the run-
ning time may increase.
The following settings are possible:
With the setting "o00" automatic door
●
opening is deactivated in all programmes.
With the setting "o01" automatic door
●
opening is activated in all programmes.
With the setting "o02" automatic door
●
opening is activated only in the Eco 50°C
programme.
→ "Automatic door opening", Page 9
Restore changed settings to the factory set-
tings.
The settings for initial start-up must be con-
figured.
repeatedly until the display shows the
repeatedly until the display shows the right
BENEFIT
This ensures the parts of the
appliance will remain clean
and hygienic.
This will prevent unpleasant
odours.
PLACEMENT
Appliance interior, e.g. bottle hung
in the cutlery basket or powder in
the interior.
24
for 3 seconds.
Advertisement
Table of Contents
