Changing Basic Settings; Cleaning And Servicing; Cleaning The Tub; Self-Cleaning Interior - IKEA PROFFSIG Manual

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
Hold programme button A and press
3.
repeatedly until the display
shows H:xx.
Release programme button A and
4.
⁠ .
Programme button A flashes and the
a
display shows H:04.

Cleaning and servicing

Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important to
clean and maintain it carefully.

Cleaning the tub

WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
Never use detergents containing
●
chlorine.
Remove any coarse soiling in the in-
1.
terior with a damp cloth.
Add detergent to the detergent dis-
2.
penser.
Select the programme with the
3.
highest temperature.
Start the programme without table-
4.
ware. → Page 36

Self-cleaning interior

To remove deposits, the appliance self-
cleans the interior at regular intervals.
The programme sequence is automatic-
ally adjusted for self-cleaning, e.g. the
cleaning temperature is briefly in-
creased. Consumption values, e.g. wa-
ter and electricity, may also increase.
Press programme button A re-
5.
peatedly until the display shows the
required setting.
Press programme button C re-
6.
peatedly until the display shows the
right value.
You can change several settings.
Press to save the setting.
7.
Close the appliance door.
8.
If the interior is no longer self-cleaned
adequately and deposits occur, see this
information:
→ "Cleaning the tub", Page 40.

Cleaning products

Only use suitable cleaning products to
clean your appliance.
→ "Safe use", Page 12

Tips on appliance care

Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
ACTION
Wipe the door
seals, the front of
the dishwasher
and the control
panel regularly
using a damp
cloth and wash-
ing-up liquid.
If the appliance is
not going to be
used for a while,
leave the door
slightly ajar.
40
BENEFIT
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
This will prevent
unpleasant
odours.