Table of Contents
Advertisement
4.3 SETTING OF THE CUTTING HEIGHT
According operation to be performed, adjust the desired cutting height; Grasp the lever, pull it to the right
and then lower it to decrease the cutting height or raise it to increase the cutting height
4.4 LATERAL DISCHARGE
Push the tab and open the flap of the side discharge. Hold it and Install the lateral discharge by putting it on
the hooks on the bar. Then release the flap.
You must fit the mulching adapter in order to use the side ejector. Hook in the side ejector adapter.
4.5 BACKDISCHARGE
If need to use the back discharge function, screw out the bolt about 40mm.
To use the back discharger function, you must open the back flap of the tool.
Remove out the mulching adapter on the hole on the back, Release the flap.
NOTE: do not install the grass catcher when using the mulching adapter.
The mulching adapter is not allowed to be fitted when the lateral discharger is used.
09
Advertisement
Table of Contents
