USER MANUAL
SQUEEGEE CLEANING
NOTE
The squeegee must be clean and its blades must be
in good conditions in order to get a good drying.
CAUTION!
It is advisable to wear protective gloves when
cleaning the squeegee because there may be sharp
debris.
1.
Drive the machine on a level floor.
2.
Turn the ignition key (A, Figure 17) to "0".
3.
Lower the squeegee (B) with the lever (C).
4.
Loosen the knobs (D) and remove the squeegee (B).
5.
Disconnect the vacuum hose (E) from the squeegee.
6.
Clean the steel or the aluminum squeegee (Figure18). Clean the
compartments (A) and the hole (B) especially. Check the front
blade (C) and the rear blade (D) for integrity, cuts and tears; if
necessary replace them (see the procedure in the following
paragraph).
7.
Assemble the squeegee in the reverse order of disassembly.
A
23
ENGLISH
B
D
D
Figure 17
A
B
A
D
C
Figure 18
C
E