AEMC PowerPad III Quick Start Manual page 4

Thank you for purchasing an AEMC
For best results from your instrument and for your safety, read the enclosed operating
instructions carefully and comply with the precautions for use. These products must be only
used by qualified and trained users.
WARNING, risk of DANGER! The operator must refer to these
instructions whenever this danger symbol appears.
CAUTION! Risk of electric shock. The voltage at the
parts marked with this symbol may be dangerous.
Equipment is protected by double insulation.
Must not be applied to or removed from bare conductors carrying danger-
ous voltages. Type B current sensor as per EN 61010-2-032.
Application or withdrawal authorized on conductors carrying dangerous
voltages. Type A current sensor per IEC 61010-2-032.
USB socket.
SD Card.
Ground/Earth.
Important instructions to read and to fully understand.
Useful information or hint to read.
The CE marking guarantees conformity with European directives and with
regulations covering EMC.
The trash can with a line through it means that in the European Union, the
product must undergo selective disposal for the recycling of electric and
electronic material, in compliance with Directive WEEE 2002/96/EC.
Definition of Measurement Categories (CAT)
CAT IV
Measurement category IV corresponds to measurements taken at the source of
low-voltage installations.
Example: power feeders, counters and protection devices.
CAT III
Measurement category III corresponds to measurements on building
installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial
devices.
CAT II
Measurement category II corresponds to measurements taken on circuits
directly connected to low-voltage installations.
Example: power supply to domestic electrical appliances and portable tools.
PowerPad III Model 8336.
® ®