Table of Contents
Advertisement
Services
Configure the device as an NTP server
Required Configuration Items
Enable the NTP service.
n
At least one upstream NTP server for synchronization. The default setting is the Digi NTP
n
server, time.devicecloud.com.
Additional Configuration Options
Additional upstream NTP servers.
n
Access control list to limit downstream access to the Connect EZ device's NTP service.
n
The time zone setting, if the default setting of UTC is not appropriate.
n
To configure the Connect EZ device's NTP service:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > NTP.
4. Enable the Connect EZ device's NTP service by clicking Enable.
5. (Optional) Configure the access control list to limit downstream access to the Connect EZ
device's NTP service.
To limit access to specified IPv4 addresses and networks:
n
a. Click IPv4 Addresses.
b. For Add Address, click .
c. For Address, enter the IPv4 address or network that can access the device's NTP
Digi Connect EZ Mini User Guide
service. Allowed values are:
Use Digi Remote Manager to view and manage your
Network Time Protocol
417
Advertisement
Table of Contents
