Kubota V2403-CR-TIE4-BG Operator's Manual page 12

6 SAFE OPERATION
Replace fuel pipes and lubricant pipes with their hose
A
clamps every 2 years or earlier whether they are
damaged or not. They are made of rubber and age
gradually.
A Keep a first aid kit and appropriate type fire extinguisher
handy at all times.
12. SAFETY LABELS
13. CARE OF SAFETY LABELS
1. Keep safety labels clean and free from obstructing material.
2. Clean safety labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing safety labels with new labels from your local KUBOTA Dealer.
4. If a component with safety label(s) affixed is replaced with a new part, make sure the new
label(s) is (are) attached in the same location(s) as the replaced component.
5. Mount new safety labels by applying to a clean dry surface and pressing any bubbles to the
outside edge.
The following label is just an example. A different
label might be applied on the actual machine.
Part No.TA040-4957-1
Do not get your hands close
to engine fan and fan belt.