Replacing Radiator Hoses And Clamp Bands; Replacing Fuel Pipes And Clamp Bands; Replacing Intake Air Line; Service As Required - Kubota V2403-CR-TIE4-BG Operator's Manual

30 REGULAR CHECKS AND MAINTENANCE WORK
BReplacing radiator hoses and clamp
bands
Consult your local KUBOTA Dealer for this service.
(See "Checking radiator hoses and clamp bands" in
"EVERY 250 SERVICE
CHECKS AND MAINTENANCE WORK" section.)
BReplacing fuel pipes and clamp bands
Consult your local KUBOTA Dealer for this service.
(See "Checking fuel pipes and clamp bands" in "EVERY
50 SERVICE HOURS" in "REGULAR CHECKS AND
MAINTENANCE WORK" section.)
When using biodiesel fuel, change the fuel pipes and
clamp bands with new ones at half intervals.
BReplacing intake air line
[D1803-CR-TIE4, V2403-CR-TIE4, V2403-CR-TE4-BG,
V2403-CR-TIE4-BG]
Consult your local KUBOTA Dealer for this service.
HOURS" in "REGULAR

SERVICE AS REQUIRED

BDraining water separator (Type 2)
If water or impurities collect in the water separator, the
indicator in the monitor will light up. For more details, refer
to the operator's manual for the equipment.
If this should happen during operation, drain from the
switch assy.
(1) Water separator filter
A Be sure to air-bleed the fuel system before getting the
engine restarted.