FireplaceXtrordinair ProBuilder 42 Linear Instruction Manual page 17

Installation 17
(for qualified installers only)
4 The (2) header standoffs are screwed down flat to front edge of the top of the fireplace. On each
standoff, remove the screw that is closest to the center of the fireplace (keep screw for reinstallation).
Bend the legs at the perforations as shown below and attach the foot of the standoff to the top of the
fireplace using the screw removed earlier in this step.
Remove screw
© Travis Industries 6/3/19 - 1453 PB 42 & 54 MV/GSB2 Install