Table of Contents
Advertisement
Do Not Drill or Screw Zone
When using screws to secure tile-board or other non-combustible to the front of the fireplace, make sure to avoid
the area on the front of the fireplace that is painted with the "DO NOT DRILL" shading. Make sure screws
penetrate no more than ½" (13mm) into the fireplace.
Do not drill or screw in
the marked area
© Travis Industries
Installation
(for qualified installers only)
6/3/19 - 1453
43
PB 42 & 54 MV/GSB2 Install
Advertisement
Table of Contents
