Table of Contents
Advertisement
TG6500C_CordlessTel2.fm Page 70 Thursday, September 30, 2004 4:56 PM
Special Features
Line Selection
When you make or answer a call, the handset and base unit can automatically
select the line when you press [C] or [s] on the handset or [SP-PHONE] on the
base unit. There are 3 types of line selection. You can change the line selection for
the handset and base unit separately. The factory preset is "Auto".
Auto (factory preset):
When making a call, LINE 1 will be selected. If that line is unavailable, LINE 2 will
be selected. When answering a call, the ringing line will be selected.
• When you call back from the Caller List (p. 45), the indicated line will be selected.
• If the Auto Talk feature is turned on (p. 25), the unit will select the ringing line when
you lift the handset off the base unit (or charger, for accessory handset users,
p. 3), to answer the call.
Line 1: Line 1 will be selected.
Line 2: Line 2 will be selected.
You can select any line by pressing a line soft key (
handset or a line button on the base unit, regardless of this setting.
Handset line selection
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Set tel line" by pressing [d] or
[B], then press the soft key (
4
Press the soft key (
selection".
5
Select "Line1", "Line2" or "Auto" by
pressing [d] or [B].
6
Press the soft key (
70
Handset
SELECT
).
SELECT
) at "Line
SELECT
), then press [OFF].
SAVE
) or (
) on the
LINE1
LINE2
Initial setting
).
Set tel line
Line selection
Line selection
:Auto
Advertisement
Table of Contents
