Panasonic KX-TG6500C Operating Instructions Manual page 40

TG6500C_CordlessTel1.fm Page 40 Thursday, September 30, 2004 4:56 PM
Making Calls
To redial the last number dialed
Press [SP-PHONE] or a line button, then press [REDIAL/PAUSE].
To put a call on hold
Press [HOLD] during a conversation.
• The line button flashes.
To return to the call, press the line button that is flashing.
• The handset users can also take the call by pressing the line soft key (
( ).
LINE2
• If another phone is connected on the same line (p. 12), you can also take the call
by lifting its handset.
• If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4
additional minutes on hold the call will be disconnected.
How the line buttons indicate the line status
The line buttons indicate the status of each line as follows.
Light off
Light on
Flashing
Flashing rapidly
40
The line is free.
The line is being used.
A call is on hold on the handset or base unit, or the
Answering System is answering a call (p. 72).
A call is being received.
) or
LINE1