Line Selection Mode; Voice Guidance Language - Panasonic KX-TG9471C Operating Instructions Manual

R The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Display language
You can select either "English" or "Français"
as the display language. The default setting is
"English".
Base unit / Handset
1
MMENUN#110
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN

Voice guidance language

You can select either "English" or "Français"
as the voice guidance language of the answering
system. The default setting is "English".
Program this setting using either the base unit or
one of the handsets.
Base unit / Handset
1
MMENUN#112
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
Program this setting using either the base unit or
one of the handsets.
Base unit / Handset
1
MMENUN#120
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN

Line selection mode

The line selection mode determines which line is
selected when:
– you lift the corded handset
– you press M N on the base unit (when making/
answering calls)
– you press M N/M N on the handset (when
making/answering calls)
The following setting is available:
– "Auto" (default): When making a call, line 1 is
selected. If that line is unavailable, line 2 is
selected. When you call back using the caller
list (page 33) or while listening to a message
(page 37, 38), the indicated line is used.
When answering a call, the ringing line is
selected.
– "Line1": Line 1 is selected.
– "Line2": Line 2 is selected.
Base unit / Handset
1
MMENUN#250
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Note:
R You can select a line manually regardless of the
line selection mode by pressing MLINE 1N or
MLINE 2N.
Getting Started
15