The Handset; Cellular Line Selection - Panasonic KX-TG7731C Operating Instructions Manual

Link to Cell
Important:
R When you are using a cellular line or a
Bluetooth headset, the base unit loses its
connection from other Bluetooth devices
(cellular phone or headset). To
automatically resume the connection to
cellular phones, leave the auto connection
on.
R Some cellular phones lose connection after
usage, please check the specification of
your cellular phone for more details.
1
MMENUN#632
2
MbN: Select the desired setting.
3
MSAVEN a MOFFN
Note:
R Some cellular phone may ask you if you
accept the connection requirement from the
base unit. In that case, select "Off" in step
2. Check the specification of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
When you make or answer calls with your
cellular phone, we recommend disconnecting
it from the base unit, otherwise received audio
may not be heard on your cellular phone.
You can also manually reconnect the cellular
phone to the base unit without waiting for the
auto connection feature to resume the
connection.
1
MMENUN
2
To connect/disconnect:
For CELL 1: #6251
For CELL 2: #6252
R A long beep sounds.
3
MOFFN
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
1
MMENUN#157
20
TG7731_41C_(en-en)_1207_ver.021.20
2
To turn on:
MbN: "On" a MSELECTN a
MbN: "Yes" a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
instead of MCELLN (page 22).
– for the base unit, press MSP-PHONEN
instead of the line button (MCELL 1N or
MCELL 2N) set for the cellular line
selection (page 20, 27).
(KX-TG7741/KX-TG275SK series:
page 3)
R Once you set this mode, the following
features cannot be used:
– Landline features (page 39)
– Answering system (page 51)
Messages cannot be received.
– Voice Mail features (page 56)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or headset are disconnected. If
the auto connection is turned on
(page 19), the cellular phones are
reconnected.
–
momentarily. The handset can be used
once
When you use the landline again
Before connecting the telephone line to the
base unit, select "Off" in step 2, "Cellular line
only mode (If you do not use the landline)",
page 20.

Cellular line selection

This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
– you press M
while the cellular line only mode is turned
on.
– you press MSP-PHONEN on the base unit
while the cellular line only mode is turned
20
N or M N
will be displayed on the handset
is displayed.
N or M N on the handset
2011/12/07 19:53:58