Table of Contents
Advertisement
TG6500C_CordlessTel1.fm Page 35 Thursday, September 30, 2004 4:56 PM
Making Calls
System capabilities
Up to 3 extensions (3 handsets or 2 handsets and the base unit) can be used at a
time, providing that the system has 2 or more handsets (p. 3). The maximum
operating number may decrease depending on the state of use.
2 outside calls can be handled simultaneously on separate telephone lines by
the handset and the base unit, or by 2 handsets.
Using the Handset
1
Press [C].
• A free line is automatically selected
and the line is displayed. (To change
the line selection, see page 70.)
• You can select a line by pressing a
line soft key (
LINE1
instead of pressing [C].
• "Talk" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3
To hang up, press [OFF] or place
the handset on the base unit.
• The line status icons (
• While using the handset, the IN USE indicator lights on the base unit.
To have a hands-free phone conversation
1
Press [s].
• A free line is automatically selected and the line is displayed.
(To change the line selection, see page 70.)
• "SP-phone" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will show the length of the call.
3
When the other party answers, speak into the microphone.
4
To hang up, press [OFF] or place the handset on the base unit.
Handset
[C]
) or (
),
LINE2
and
) show the status of each line (p. 10).
L1
L2
Soft Key
(
Soft Key
(
[OFF]
[s]
[B], [d]
[REDIAL/
PAUSE]
Microphone
[HOLD/INTERCOM]
)
LINE1
)
LINE2
35
Advertisement
Table of Contents
