Advertisement
Before Beginning Operation
Installing the BZP-100 Camera
PC Setup Unit Software
After making the hardware connections and installing
MS-DOS and Windows, the next step is to install the
Camera PC Setup Unit software.
Notes
• Before beginning the installation, you are
recommended to make a backup copy of the program
disk.
• Check that the floppy disk containing the software is
write-protected.
Installation Procedure
1
Insert the BZP-100 program disk 1 in the floppy
disk drive of the computer.
2
In the Program Manager File menu, select Run.
The Run dialog box appears.
3
In the Command Line box, enter the drive letter
and the command '\setup.exe'.
Example: A:\setup.exe
4
Click the OK button.
The BZP-100 INSTALL dialog box appears.
Installation dialog box
5
To change the installation directory, click the Set
Location button.
8(E)
The BZP-100 Get Path dialog box appears.
If you wish to install BZP-100 in the displayed
directory, skip to step 8.
6
Enter the directory in which you wish to install
BZP-100, in the Path box.
7
Click the Continue button.
8
Click the Install button.
The installation starts, then once the contents of
disk 1 are read in the following dialog box appears.
9
Eject disk 1 from the floppy disk drive, and insert
disk 2, then click the OK button.
The installation continues.
10
When the next dialog box appears, click the OK
button.
This completes the installation process.
Advertisement
Chapters
