Installing On A Sliding Gate - Pilz PSEN sl-1.0p 2.2 Operating Manual

BA PSEN sl­1.0p 1.1/1.1 VA/2.1/2.2
Installing on a sliding gate
Align the actuator mounting bracket flush with the sliding gate
and tighten the screws.
Install the actuator at the height required.
Align the sensor mounting bracket flush with the frame and
fasten with screws.
(Important: do not tighten the screws)
Fix sensor upright with a screw (a), close gate.
Align mounting brackets, press firmly together and tighten screw
(b).
Operating Manual BA PSEN sl­1.0p 1.1/1.1 VA/2.1/2.2
21909­EN­09
(a)
20