Table of Contents
Advertisement
Quick Start
Parts and Controls
Stability Status (4)
On the right hand side of the screen, you will find a graph displaying the current status of the
stability of the Field Metrology Well.
Heating/Cooling Status (5)
Just below the stability graph there is a bar graph that will indicate HEATING, COOLING, or
CUTOUT. This status graph indicates the current level of heating or cooling if the instrument is
not in cutout mode.
UUT Output (6) [-P models only]
When installed, the most recent UUT output measurement is shown. The value displayed de-
pends on the output type selected: mA, RTD, or TC.
Soft Key Functions (7)
The four texts at the bottom of the display (not shown) indicate the functions of the soft keys
(F1–F4). These functions change with each menu.
Editing Windows
While setting up and operating the instrument, you are often required to enter or select param-
eters. Editing windows appear on the screen when necessary to show the values of parameters
and allow edits.
Figure 4
914X display
21
Advertisement
Table of Contents
