Spirit CT900 ENT Owner's Manual page 35

SYSTEM MAINTENANCE SUITE
Press the "Home" icon 10 consecutive repetitions to enter the Maintenance suite.
The two most commonly used menus for setting up the exercise machine are described below; the TV
Setup and Maintenance menus. For information on other sections of the Maintenance suite refer to the
technical service manual or call Spirit service.
TV Setup
1. Begin by selecting either TV or HDMI as the tuner source.
2. If TV is chosen press 'OSD Menu'. The first highlighted item on the menu is 'Air/Cable' and then
'Cable' or 'Air' afterward (Air = TV signals broadcasted over the air instead of a cable). Press
the 'OSD Enter' to change the selection between Cable and Air Signal source, usually Cable).
3. After selecting Cable or Air use the arrows located below the 'OSD Exit' key to navigate down to
'Auto Scan' then press 'OSD Enter'. The tuner will now scan for all available channels. Press
'OSD Exit' when done. You can modify the channels by pressing the 'Update Channel List'.
4. The 'OSD Command button is for engineering use only.
-34-