Spirit CT800 Owner's Manual
Hide thumbs
Also See for CT800:
- Owner's manual (46 pages) ,
- Operation manual (21 pages) ,
- Owner's manual (11 pages)
Related Manuals for Spirit CT800
Summary of Contents for Spirit CT800
- Page 1 CT800 T readmill OWNER’S MANUAL Please carefully read this entire manual before operating your new treadmill...
- Page 2 CT800 T readmill...
- Page 3 Product Registration Important Safety Instructions Important Electrical Instructions Important Operation Instructions CT800 Assembly Instructions Operation of Y our Console Programmable Features Using Heart Rate T ransmitter General Maintenance Service Checklist - Diagnosis Guide Manufacturer’s Limited Warranty...
- Page 5 Congratulations on your new treadmill and welcome to the Spirit Fitness family! Thank you for your purchase of this quality group treadmill from Spirit Fitness. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available.
- Page 6 11. Do not operate where aerosol (spray) products are being use or where oxygen is being ad ministered. 12. Connect this appliance to a properly grounded outlet only. See Grounding Instructions. 13. The appliance is intended for household use. SAVE THESE INSTRUCTIONS - THINK SAFETY! CT800 T readmill...
-
Page 7: Grounding Instructions
Whenever the adapter is used, it must be held in place by a metal screw. CT800 T readmill... - Page 8 Be familiar with its function and limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the console. Use the Stop / Pause switch in normal operation. CT800 T readmill...
-
Page 9: Pre-Assembly
Locate the hardware package. Remove the tools first. Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item number from the assembly drawing for reference. Assembly T ools 3/8” Allen Wrench 10mm Allen Wrench Phillip Head Screwdriver CT800 T readmill... - Page 10 Install the lower side caps (32 & 33) with four screws (73). HARDWARE #58. 3/8” #59. 3/8” #104. 3/8” x 3-3/4” #73. M5 x 12mm Self Split Washer Flat Washer Stainless Steel Bolt Tapping Screw (6 pcs) (6 pcs) (6 pcs) (4 pcs) CT800 T readmill...
- Page 11 (110) in the lower set of holes. HARDWARE #110. M5 x10mm #73. M5 x 12mm #125. M5 #112. M5 x 30mm Machine Screw Sheet Metal Screw Star Washer Machine Screw (2 pcs) (1 pc) (1 pc) (2 pcs) CT800 T readmill...
- Page 12 When assembling the console mounting interface brackets (3 & 4) please be sure to slide the brackets all the way toward the back of the console before tightening the bolts. Push mounting bracket all the way to the back of the console, then tighten the screws. CT800 T readmill...
- Page 13 (59). Be careful not to pinch the computer cable. HARDWARE #58. 3/8” #59. 3/8” #105. 3/8” x 3/4” #108. M8 x 12mm Split Washer Flat Washer Button Head Socket Bolt Socket Cap Bolt (6 pcs) (6 pcs) (6 pcs) (6 pcs) CT800 T readmill...
- Page 14 The Communication port (COMM) can be used to interact with the Virtual Reality Fitness system by WebRacing™ LTD. See your Spirit Fitness dealer for more information on how your members can race against a computer controlled figure or real life exercisers.
-
Page 15: Quick Start Operation
“picture” as values are changed during a workout. There are twenty-four columns, indicating time. The 24 columns are divided into 1/24th of the total time of the program. When the time is counting up from zero (as in quick start) each column represents 1 minute. CT800 T readmill... -
Page 16: Heart Rate Feature
Grip Pulse signal. You may use the Grip Pulse feature while in Heart Rate Control. The CT800 will also pick up wireless heart rate transmitters that are Polar compatible, including coded transmissions. - Page 17 T o Select and Start A Preset Program The Spirit Fitness CT800 offers five preset programs, a Custom User defined program, two heart rate control programs, a Gerkin protocol based Fitness Test and one Manual program. 1. Select a program then press the Enter key to begin customizing the program with your personal data, or just press the Start key to begin the program with the default settings.
-
Page 18: Custom Program
6. The first column will be blinking again. The console is now ready for the incline settings. Repeat the same process used to set the speed values for programming the segments for incline. 7. Press the Start button to begin the workout and also save the program to memory. CT800 T readmill... -
Page 19: Fitness Test
68.2 8:45 6.5mph 9:00 6.5mph 70.7 10.1 9:15 6.5mph 72.1 10.2 9:30 6.5mph 73.1 10.3 9:45 6.5mph 73.8 10.4 10:00 6.5mph 74.9 11.1 10:15 7.0mph 76.3 11.2 10:30 7.0mph 77.7 11.3 10:45 7.0mph 79.1 11.4 11:00 7.0mph CT800 T readmill... - Page 20 22-25 20-21 very poor <30 <30 <26 <25 <22 <20 18-25 26-35 36-45 46-55 56-65 years years years years years years CT800 T readmill excellent good 47-56 45-52 38-45 34-40 32-37 28-32 above average 42-46 39-44 34-37 31-33 28-31 25-27...
-
Page 21: Heart Rate Programs
With all Spirit Fitness Heart Rate programs treadmills you may use the heart rate monitor feature without using the Heart Rate program. This function can be used during manual mode or during any of the nine different programs. -
Page 22: Rate Of Perceived Exertion
If you are feeling tired and sluggish, it is because your body needs a break. In this condition, your pace will feel harder. Again, this will show up in your RPE and you will train at the proper level for that day. CT800 T readmill... -
Page 23: Erratic Operation
Perimeter fence for a pet. Some people have problems with the transmitter picking up a signal from their skin. If you have problems try wearing the transmitter upside down. Normally the transmitter will be oriented so the Spirit Fitness logo is right side up. -
Page 24: Heart Rate Control
5. The Time window will now be blinking. Adjust the time and press enter. 6. Press Start to begin program. 7. During the program you may increase or decrease the target heart rate by pressing the Incline Up/Down buttons. CT800 T readmill... -
Page 25: Belt Adjustments
- that connects the motor to the front roller. If that belt is loose it feels similar to the walking belt being loose. Tightening the motor belt should be done by a trained service person. CT800 T readmill... -
Page 26: T Readbelt T Racking Adjustment
Proper belt tracking is an owner responsibility common with all treadmills. ATTENTION Damage to the running belt resulting from improper tracking / tension adjustments is not covered under the Spirit Fitness warranty. CT800 T readmill... - Page 27 If an extension cord is required it should be as short speed on display as possible and heavy duty 16 gauge minimum. Low voltage. Contact an electrician or your Spirit Fitness dealer. A minimum of 110 volt AC current is required. Tread-belt stops quickly/suddenly when High belt/deck friction.
-
Page 28: Calibration Procedure
Units (Set to English or Metric display readings) Maintenance (Resets the lube reset message and odometer) vi. Pause Mode (Turn on allow 5 minutes of pause, turn off to have the console pause indefinitely) Display Test (Tests all the display functions) CT800 T readmill... - Page 29 T readmill Warranty - Effective March 1, 2012 Spirit Fitness warrants all its treadmill parts for a period of time listed below from the date of sale, as determined by sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date. Spirit Fitness’ responsibilities include providing new or remanufac- tured parts, at Spirit Fitness’...
- Page 30 3000 Nestle Road Jonesboro, AR 72401 - Phone: 800-258-4555 - Fax: 870-935- 7 611 © 2013 All Rights Reserved. www.spiritfitness.com CT800 Owner’s Manual Rev . 2...