Spirit CT900 ENT Owner's Manual page 16

Pause/Stop:
• Press Stop key once or Home key on the screen, the bike will stop and keep values of time,
distance and calorie on the screen. The screen will count down for 5 minutes then reset and return
to the initial status.
• Press Start key to continue the workout during pause.
• Press Stop key twice will terminate the setting with displaying the workout summary. If Stop key is
pressed a third time, the console will return to the initial status (the beginning).
Incline:
The incline is adjustable any time during the workout.
•
• Press and hold "UP" or "DOWN" button or Incline +/- button on the screen to change the incline to the
desired level.
Heart Rate Feature
The Pulse (Heart Rate) on the screen shows the current value of your heart rate in beats per
minute. You must use both left and right stainless steel sensors to pick up your pulse. Pulse values
are displayed anytime the computer is receiving a Grip Pulse signal. You may use the Grip Pulse
feature while in Heart Rate Control. The Console will also pick up wireless heart rate transmitters
that are 5 khz Polar compatible.
Wireless heartbeat device
Click on this screen to set the wireless chest strap pairing, check the paired use of the 5KHz
wireless chest strap, or the Bluetooth wireless chest strap.
To turn off the treadmill:
The screen will automatically turn off (go to sleep) after 30 minutes of inactivity. This function is
called sleep mode. In sleep mode, the treadmill will power down everything except for a minimum of
circuitry for detecting key presses, so it will start up again if this is activated. There is only a tiny
amount of current used in sleep mode (about the same as your TV when it is turned off) and it is
perfectly fine to leave the main power switch on in sleep mode.
-15-