Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trotec PTNS 11-230V
Summary of Contents for Trotec PTNS 11-230V
- Page 1 PTNS 11-230V ORIGINAL INSTRUCTIONS TACKER...
-
Page 2: Table Of Contents
Information marked with this symbol helps you to carry power tool. Distractions can cause you to lose control. out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the instructions must be observed. tacker PTNS 11-230V... -
Page 3: Safety
• Do not overreach. Keep proper footing and balance at tool in unexpected situations. all times. This enables better control of the power tool in unexpected situations. tacker PTNS 11-230V... - Page 4 This will softwood or material similar to wood whilst adhering to the ensure that the safety of the power tool is maintained. technical data. We recommend using the power tool with original Trotec Safety instructions for tackers accessories. Foreseeable misuse •...
- Page 5 Caution Keep a sufficient distance from heat sources. Note If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. tacker PTNS 11-230V...
-
Page 6: Information About The Device
Tacker guide nose / staple ejection Magazine slider Impact force regulator On/off switch Wire nails Staples Scope of delivery • 1 x Device PTNS 11-230V • 200 x staples, type 53, length: 14 mm, width: 11.4 mm • 100 wire nails, type 47, length: 15 mm, width: 2 mm • 1 x manual tacker PTNS 11-230V... - Page 7 Vibration emission value a 2.929 m/s² Uncertainty K 1.5 m/s² Sound values according to EN 60745 Sound pressure level L 84.8 dB(A) Sound power L 95.8 dB(A) Uncertainty K 3 dB Wear hearing protection. Excessive noise can lead to hearing loss. tacker PTNS 11-230V...
-
Page 8: Transport And Storage
Wear appropriate eye protection when working with the device. Info At the magazine filling level indicator you can check whether any staples or wire nails are left in the magazine. Info Do not open or close the magazine by force (e.g. for filling). tacker PTNS 11-230V... - Page 9 1. Insert the mains plug into a properly secured mains socket. 4. Alternatively, the magazine (10) can also be filled with wire nails (8) – insert them on the left-hand side. Observe the mark (11) on the left-hand side of the magazine slider that tacker PTNS 11-230V...
-
Page 10: Operation
1. Set the on/off switch (7) to I to switch the device on. 2. Put the tacker guide nose (4) down on the respective spot you want to tack. The tacker guide nose must be pushed in by a few millimetres. tacker PTNS 11-230V... -
Page 11: Available Accessories
5. Set the on/off switch (7) to 0 to switch the device off. company or by Trotec. Light smoke or odour is emitted during the first use: • This is not a fault. These phenomena disappear after a brief runtime. -
Page 12: Maintenance
• Allow the device to cool down completely. that apply for many EU countries on the website https:// Warning of electrical voltage hub.trotec.com/?id=45090. Otherwise, please contact an official recycling centre for electronic and electrical equipment Maintenance tasks which require the housing to be opened must only be carried out by authorised authorised for your country. -
Page 13: Declaration Of Conformity
Declaration of conformity Declaration of conformity in accordance with the EC Machinery Directive 2006/42/EC, Annex II, Part 1, Section A We – Trotec GmbH – declare in sole responsibility that the product designated below was developed, constructed and produced in compliance with the requirements of the EC Machinery Directive in the version 2006/42/EC. - Page 14 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the PTNS 11-230V and is the answer not in the manual?
Questions and answers