Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PJSS 10-230V
Summary of Contents for Trotec PJSS 10-230V
- Page 1 PJSS 10-230V OPERATING MANUAL 850W PENDULUM ACTION JIGSAW...
-
Page 2: Table Of Contents
Caution This signal word indicates a hazard with a low risk level which, if not avoided, can result in minor or moderate injury. Operating manual – 850W pendulum action jigsaw PJSS 10-230V... -
Page 3: Safety
No liability is accepted for damages resulting from improper use. In such a case, any warranty claims will be voided also. Operating manual – 850W pendulum action jigsaw PJSS 10-230V... - Page 4 • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of a dust extraction system may reduce dust-related hazards. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
- Page 5 A jammed saw blade could break or cause a kickback. • Keep your hands out of the sawing area. Do not reach underneath the workpiece. Risk of injury upon contact with the saw blade. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
- Page 6 Wear a dust mask. It saves you from inhaling harmful dusts generated when processing workpieces. Wearing protective gloves. They protect your hands from burns, crushing injuries and skin abrasions. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
- Page 7 Notice handled without due care. Wear protective gloves! If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
-
Page 8: Information About The Device
Furthermore the device is equipped with a fan function for a cutting line without sawdust and with an integrated connection for effective external vacuum cleaning. Operating manual – 850W pendulum action jigsaw PJSS 10-230V... - Page 9 • 3 x Saw blade HCS wood • 1 x Saw blade HSS metal • 1 x Adapter for dust extraction • 1 x Anti-splinter guard • 1 x Sliding block • 1 x Manual Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
-
Page 10: Technical Data
This can reduce the vibration load over the entire work period significantly. Operating manual – 850W pendulum action jigsaw PJSS 10-230V... -
Page 11: Start-Up
5. Push the saw blade into the quick-release chuck up to the stop. Use a suitable sawblade with single lug shank. Operating manual – 850W pendulum action jigsaw PJSS 10-230V... - Page 12 4. To reattach the sliding block (21), first push it onto the front part of the base plate (6). 5. Then let the fastening clips (20) lock in place at the rear. 6. Check the sliding block (21) for tight fit. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
- Page 13 2. Push the base plate lock (14) to the front. 5. Slide the base plate back to the front until the toothing engages. 6. Push the base plate lock (14) to the rear. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
- Page 14 2. Slide the rip fence (8) into the slot with the marking pointing 3. Move the rip fence (8) into the desired position. 4. Tighten the locking screws (15). Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
-
Page 15: Operation
• Use a narrow saw blade when sawing tight curves. • The saw blade should not be longer than required for the intended cut. Connecting the power cable 1. Insert the mains plug into a properly secured mains socket. Operating manual – 850W pendulum action jigsaw PJSS 10-230V... - Page 16 5. Press the on/off switch (2) and hold it during operation. ð The device operates with the previously selected 4 x = settings. 6. Let go of the on/off switch (2) to stop the device. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
- Page 17 4. Slide the splinter blow-off/suction selector switch (4) to the left to the position for dust extraction. Operating manual – 850W pendulum action jigsaw PJSS 10-230V...
-
Page 18: Available Accessories
Troubleshooting tasks which require the housing to be opened Please contact the customer service. If necessary, bring the must only be carried out by a specialist dealer or by Trotec. device to an authorized specialist electrical company or to Slight smoke or odour are emitted during first use: Trotec for repair. -
Page 19: Maintenance
• Remove any abrasive dust and, if applicable, wood chips from the quick-release chuck. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. Operating manual – 850W pendulum action jigsaw PJSS 10-230V... - Page 20 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...