Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PJSS11-20V
Summary of Contents for Trotec PJSS11-20V
- Page 1 PJSS 11-20V OPERATING MANUAL CORDLESS PENDULUM ACTION JIGSAW...
-
Page 2: Table Of Contents
Warning of sharp object This symbol indicates dangers to the life and health of persons due to pointed objects. http://hub.trotec.com/?id=39926 Warning of hand injuries This symbol indicates dangers to the health of persons due to hand injuries. -
Page 3: Safety
• If operating a power tool in a damp location is Safety unavoidable, use a residual current device (RCD) Read this manual carefully before starting or using the protected supply. Use of an RCD reduces the risk of device. Always store the manual in the immediate vicinity electric shock. - Page 4 • When battery pack is not in use, keep it away from General Power Tool Safety Warnings – Power tool other metal objects, like paper clips, coins, keys, nails, use and care screws or other small metal objects, that can make a •...
- Page 5 • Do not work on moistened material or moist surfaces. • Only hold the power tool against the workpiece when We recommend using the power tool with original Trotec the tool is switched on and running. Otherwise there is accessories.
- Page 6 Residual risks Warning Do not process materials containing asbestos. Warning of electrical voltage Asbestos is considered carcinogenic. Electric shock from insufficient insulation. Warning Check the device for damages and proper functioning before each use. Make sure not to hit power, gas or water lines when If you notice damages, no longer use the device.
-
Page 7: Information About The Device
Information about the device Device description The device PJSS 11-20V is suited for varied sawing operations with a quick sawing progress due to the adjustable pendulum action. The anti-splinter guard ensures tear-free cuts. The pendulum action can be set to 3 levels, or switched off if required. - Page 8 Device depiction Designation Start lock On/off switch Dust extraction connection Splinter blow-off/suction selector switch Pendulum action selector switch Base plate with removable sliding block Protective pin Rip fence Saw blade set Adapter for dust extraction Anti-splinter guard Guide roller Quick-release chuck Locking screws for base plate Locking screws for rip fence Guard...
- Page 9 Scope of delivery Wear hearing protection. Excessive noise can lead to hearing loss. • 1 x Cordless pendulum action jigsaw • 1 x Rip fence Information on noise and vibration: • 2 x Saw blade HCS wood • The vibration level specified in these instructions was •...
-
Page 10: Transport And Storage
• For storing the device, use the transport case included in Transport and storage the scope of delivery in order to protect the device from external influences. Note • Do not store Li-ion batteries which are completely If you store or transport the device improperly, the discharged. -
Page 11: Start-Up
2. Insert the mains plug of the quick charger (17) into a Start-up properly fused mains socket. Unpacking the device ð The red battery LED (21) is illuminated. ð Charging requires approx. one hour. • Take the transport case out of the packaging. 3. - Page 12 Inserting the battery Checking the battery status 1. Slide the battery (19) onto the device until it locks in place. The battery comes with an integrated battery level indication. The battery status is displayed as follows by the three LEDs of the battery level indication (18): LED colour Meaning...
- Page 13 ð The quick-release chuck must return to its initial 3. Turn the quick-release chuck (13) to the side and hold it in this position. position. 8. Check whether the saw blade is properly locked in place. 9. Reattach the protective cover (16). 10.
- Page 14 Mounting / removing the sliding block Mounting / removing the anti-splinter guard To protect the surface of the material to be processed, the The anti-splinter guard serves to avoid tearing of the surface sliding block is already preassembled. You may remove the when sawing in wood.
- Page 15 4. Slide the base plate to the rear until it can be freely Adjusting the cutting angle rotated. The cutting angle can be adjusted to the left or right at angles of 0° / 15° / 30° / 45°. 1. Remove the battery (19) from the device (see Removing the battery).
- Page 16 7. Tighten the screws (14) at the bottom of the device using 3. Slide the rip fence (8) into the slot with the marking the Allen wrench (20). pointing up. 4. Move the rip fence (8) into the desired position. 5. Tighten the locking screws (15). 6.
-
Page 17: Operation
Operation Tips and notes on handling the jigsaw General information: • Keep the venting slots clear to prevent the motor from overheating. • Check the tool in the tool holder for proper fit before every application. The tool must be firmly locked in place in the designated holding fixtures in the tool holder. -
Page 18: Available Accessories
Connecting the dust extraction system Shutdown You can connect a vacuum cleaner to the device. The adapter Warning of electrical voltage included in the scope of delivery allows to connect smaller pipe Do not touch the mains plug with wet or damp hands. diameters. -
Page 19: Errors And Faults
Wait for at least 3 minutes after maintenance and • Check the quick charger for damages. Should the quick repair work. Only then switch the device back on. charger be damaged, stop using it. Contact the Trotec customer service. Your device still does not operate correctly after these checks? •... -
Page 20: Maintenance
Trotec. effects for the environment and human health caused by the Notes on maintenance... - Page 22 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the PJSS11-20V and is the answer not in the manual?
Questions and answers