Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PIDS 10-20V
Summary of Contents for Trotec PIDS 10-20V
- Page 1 PIDS 10-20V ORIGINAL INSTRUCTIONS CORDLESS IMPACT DRIVER...
-
Page 2: Table Of Contents
Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the instructions must be observed. cordless impact driver PIDS 10-20V... -
Page 3: Safety
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. cordless impact driver PIDS 10-20V... - Page 4 Liquid ejected from the whilst adhering to the technical data. battery may cause irritation or burns. We recommend using the power tool with original Trotec • Do not use a damaged or modified battery. Damaged or accessories.
- Page 5 Avoid direct sunlight and moisture. There is a risk of explosion! Warning Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications! cordless impact driver PIDS 10-20V...
-
Page 6: Information About The Device
• 1 x Rechargeable battery • 1 x Quick charger • 1 x Square socket adapter 1/4" • 1 x Bit extension 1/4" 50 mm • 1 x Belt clip • 1 x Transport case • 1 x Manual cordless impact driver PIDS 10-20V... - Page 7 Sound pressure level L 93.9 dB(A) Sound power level L 104.9 dB(A) Uncertainty K 3 dB(A) Vibration information according to EN 62841-2-2 Vibration emission value a 13.43 m/s Uncertainty K 1.5 m/s Wear hearing protection. Excessive noise can lead to hearing loss. cordless impact driver PIDS 10-20V...
-
Page 8: Transport And Storage
• Check the contents of the transport case for completeness and look for damages. Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. • Dispose of the packaging material according to the national regulations. cordless impact driver PIDS 10-20V... - Page 9 5. Take the battery (6) out of the quick charger (7) by pressing and holding the release button (13) and pulling 3. If required, charge the battery (6) as described in the the battery (6) off the quick charger (7). section Charging the battery. cordless impact driver PIDS 10-20V...
- Page 10 2. Push the locking mechanism at the tool holder (1) to the counter-clockwise rotation direction indicator (2) you front and hold it in place. can see in which direction the screws or nuts will be 3. Remove the tool from the tool holder (1), if any. screwed. cordless impact driver PIDS 10-20V...
-
Page 11: Operation
• When using countersunk screws, the drill hole should be countersunk beforehand. • Especially smaller screws and bits may be damaged when selecting an excessive torque and / or speed at the tool. cordless impact driver PIDS 10-20V... -
Page 12: Available Accessories
1. Set the switch for clockwise / counter-clockwise • Check the quick charger for damages. Should the quick rotation (2) to centre position (lock). charger be damaged, stop using it. Contact the Trotec 2. If required, allow the device to cool down. customer service. -
Page 13: Maintenance
• Dry the bits with a soft, lint-free cloth. • Keep the connecting terminals on the device and charger clean. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. cordless impact driver PIDS 10-20V... -
Page 14: Disposal
The Annex II, part 1, Section A addresses can be obtained from your municipality or local Herewith, we – Trotec GmbH & Co. KG – declare that the administration. For further return options provided by us please machinery designated below was developed, constructed and refer to our website www.trotec24.com. - Page 15 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...