Trotec PJSS 12-230V Original Instructions Manual
  1. Manuals
  2. Brands
  3. Trotec Manuals
  4. Power Tool
  5. PJSS 12-230V
  6. Original instructions manual

Trotec PJSS 12-230V Original Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PJSS 12-230V
EN
ORIGINAL INSTRUCTIONS
850W PENDULUM ACTION
JIGSAW

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PJSS 12-230V and is the answer not in the manual?

Questions and answers

Related Manuals for Trotec PJSS 12-230V

Summary of Contents for Trotec PJSS 12-230V

  • Page 1 PJSS 12-230V ORIGINAL INSTRUCTIONS 850W PENDULUM ACTION JIGSAW...

  • Page 2: Table Of Contents

    Caution This signal word indicates a hazard with a low risk level which, if not avoided, can result in minor or moderate injury. 850W pendulum action jigsaw PJSS 12-230V...

  • Page 3: Safety

    • If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 850W pendulum action jigsaw PJSS 12-230V...
  • Page 4 • Do not work on moistened material or moist surfaces. • Only hold the power tool against the workpiece when the tool is switched on and running. Otherwise there is a risk of kickbacks. 850W pendulum action jigsaw PJSS 12-230V...
  • Page 5 Crushing hazard upon contact with these whilst adhering to the technical data (see instructions). components. • Ensure sufficient ventilation. We recommend using the power tool with original Trotec • Regularly check the quick-release chuck for wear or accessories. damage.
  • Page 6 Caution Vibration emissions can cause a health hazard if the device is used for an extended period of time or if it is not properly handled and maintained. 850W pendulum action jigsaw PJSS 12-230V...

  • Page 7: Information About The Device

    Hold onto the mains plug while pulling the power cutting line without sawdust and with an integrated connection cable out of the mains socket. for effective external vacuum cleaning. 3. Do not reconnect a defective device to the mains. 850W pendulum action jigsaw PJSS 12-230V...
  • Page 8 • 3 x Saw blade HCS wood • 1 x Saw blade HSS metal • 1 x Adapter for dust extraction • 1 x Anti-splinter guard • 1 x Sliding block • 1 x Manual 850W pendulum action jigsaw PJSS 12-230V...

  • Page 9: Transport And Storage

    • Dry and protected from frost and heat not properly handled and maintained. • Ambient temperature below 45 °C • protected from dust and direct sunlight 850W pendulum action jigsaw PJSS 12-230V...

  • Page 10: Start-Up

    5. Push the saw blade into the quick-release chuck all the way to the stop (13). Use a suitable sawblade with single lug shank. 850W pendulum action jigsaw PJSS 12-230V...
  • Page 11 4. To reattach the sliding block (21), first push it onto the front part of the base plate (6). 5. Then let the fastening clips (20) lock in place at the rear. 6. Check the sliding block (21) for tight fit. 850W pendulum action jigsaw PJSS 12-230V...
  • Page 12 2. Push the base plate lock (14) to the front. 5. Slide the base plate (6) back to the front until the toothing engages. 6. Push the base plate lock (14) to the rear. 7. Check the base plate (6) for tight fit. 850W pendulum action jigsaw PJSS 12-230V...
  • Page 13 1. Turn the setting wheel (1) to the desired stroke rate level. Connecting the power cable 1. Insert the mains plug into a properly secured mains socket. 850W pendulum action jigsaw PJSS 12-230V...

  • Page 14: Operation

    Examining the laser output aperture by use of optical instruments (e.g. magnifying glass, magnifiers and the like) entails the risk of eye damage. When working with a laser of class 2, observe the national regulations on wearing eye protection. 850W pendulum action jigsaw PJSS 12-230V...
  • Page 15 ð The device keeps running and continuous operation is activated. 4. Press the on/off switch (2) to stop continuous operation. ð The lock-on switch (19) automatically returns to centre position. 5. Let go of the on-/off-switch (2) to stop the device. 850W pendulum action jigsaw PJSS 12-230V...

  • Page 16: Available Accessories

    Jigsaw blade set for metal, 10-piece 6.215.001.131 3. Connect a suitable vacuum cleaner (e.g. industrial vacuum cleaner) to the dust extraction (3). 4. Slide the splinter blow-off/suction selector switch (4) to the left to the position for dust extraction. 850W pendulum action jigsaw PJSS 12-230V...

  • Page 17: Errors And Faults

    • Check whether the pendulum action setting is suitable for the material to be processed. • If the saw blade is worn, replace it with a new one. • Check whether the chosen saw blade is suitable for the material to be processed. 850W pendulum action jigsaw PJSS 12-230V...

  • Page 18: Maintenance

    • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. • Remove dust and chips from the chip ejector. If the chip ejector is blocked, clean it with suitable means (e.g. compressed air). 850W pendulum action jigsaw PJSS 12-230V...

  • Page 19: Declaration Of Conformity

    Declaration of conformity Declaration of conformity in accordance with the EC Machinery Directive 2006/42/EC, Annex II, Part 1, Section A We – Trotec GmbH – declare in sole responsibility that the product designated below was developed, constructed and produced in compliance with the requirements of the EC Machinery Directive in the version 2006/42/EC.
  • Page 20 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...

Table of Contents