Connecting Terminal Blocks - Siemens SIRIUS 3TK2810-0 Equipment Manual

6.3

Connecting terminal blocks

Hazardous voltage
Can cause death, serious injury, or property damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Procedure for screw-type terminal blocks
1. Insert the relevant cable into the square opening on the screw-type terminal until it
engages.
2. Hold the cable in the screw terminal.
3. Tighten the screw of the terminal in which the cable is inserted.
4. Pull on the cable to ensure it is screwed tight.
3TK2810-0 standstill monitor
Equipment Manual, 08/2023, A5E50307927002A/RS-AA/001
WARNING
Connecting
6.3 Connecting terminal blocks
43