Mounting The Device On A Din Rail - Siemens SIRIUS 3TK2810-0 Equipment Manual

Mounting
5.2 Mounting the device on a DIN rail
5.2

Mounting the device on a DIN rail

Requirement
At the installation location, a horizontal 35 mm mounting rail in accordance with DIN EN 60715
is properly secured
DIN rail mounting procedure
1. Hang the back of the device on the upper edge of the DIN rail
2. Press the lower half of the device against the DIN rail until the device engages
36
Equipment Manual, 08/2023, A5E50307927002A/RS-AA/001
3TK2810-0 standstill monitor