Page 1
USER’S MANUAL Model No. PFEX15914.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.proformservice.com/ registration. CUSTOMER CARE For service at any time, go to www.proformservice.com.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
BEFORE YOU BEGIN Thank you for selecting the new PROFORM reading this manual, please see the front cover of this ® ES exercise bike. Cycling is an effective exercise for manual. To help us assist you, note the product model increasing cardiovascular fitness, building endurance, number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
ASSEMBLY • To hire an authorized service technician to • To identify small parts, see page 7. assemble this product, call 1-800-445-2480. In addition to the included tool(s), assembly • Assembly requires two persons. requires the following tools: one Phillips screwdriver •...
Page 9
3. With the help of a second person, place some of the packing materials (not shown) under the rear of the Frame (1). Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 120mm Screws (44); start both Screws, and then tighten them.
Page 10
6. Attach the Accessory Tray (9) to the Upright (4) with an M6 x 50mm Screw (42). 7. Untie and discard the wire tie on the Main Wire (41). While a second person holds the Console Bracket (82) near the Upright (4), route the Main Wire (41) through the notch in the Upright, through the Upright Bracket (84), and through the hole in the center of the Console Bracket.
Page 11
9. While a second person holds the Console (5) near the Console Bracket (82), connect the wires on the Console to the Main Wire (41) and to the Left and Right Pulse Wires (7, 8). Insert the excess wire into the Console Bracket (82).
Page 12
11. Attach the Seat Handlebar (18) to the Seat Carriage (11) with four M8 x 40mm Screws (56); start all the Screws, and then tighten them. 12. Slide the Backrest Frame (14) onto the Seat Handlebar (18). Attach the Backrest Frame (14) with four M6 x 30mm Screws (51) and four M6 Washers (112);...
Page 13
13. Attach the Seat (12) to the Seat Handlebar (18) with four M6 x 20mm Screws (67) and four M6 Washers (112) (only two of each are shown); start all the Screws, and then tighten them. 14. Identify the Right Pedal (29). Using an adjustable wrench, firmly tighten the Right Pedal (29) clockwise into the Right Crank Arm (99).
Page 14
15. IMPORTANT: If you purchased the optional iFit module, insert the iFit module into the iFit port on the Console (5) before you attach the Tablet Holder (114). After the exercise bike is iFit Port assembled, follow the instructions included with the iFit module.
HOW TO USE THE EXERCISE BIKE HOW TO PLUG IN THE POWER ADAPTER HOW TO ADJUST THE PEDAL STRAPS IMPORTANT: If the exercise bike has been exposed To tighten a pedal to cold temperatures, allow it to warm to room strap, pull downward temperature before you plug in the power adapter.
Page 16
CONSOLE DIAGRAM MAKE YOUR FITNESS GOALS A REALITY WITH Upload your workout results to the iFit cloud IFIT.COM and track your accomplishments. With your new iFit-compatible fitness equipment, you can use an array of features on iFit.com to make your Set calorie, time, or distance goals for your fitness goals a reality: workouts.
Page 17
FEATURES OF THE CONSOLE HOW TO USE THE MANUAL MODE The advanced console offers an array of features 1. Begin pedaling or press any button on the console to turn on the console. designed to make your workouts more effective and enjoyable.
Page 18
Distance (Dist.)—This display mode will show When a wireless iFit module the distance that you have pedaled in miles or is connected, the wireless kilometers. symbol at the top of the dis- play will show the strength of Pulse—This display mode will show your heart rate your wireless signal.
Page 19
6. Turn on the fan if desired. The maximum resistance level and the maximum speed for the workout will also appear in the The fan has low and high display. speed settings. Press the fan 3. Start the workout. increase and decrease but- tons repeatedly to select a fan speed or to turn off the fan.
Page 20
If the resistance level for the current segment is Then, press the increase and decrease buttons too high or too low, you can manually override the next to the Enter button to set the desired goal. setting by pressing the Quick Resistance buttons. IMPORTANT: When the current segment of the 3.
Page 21
HOW TO USE AN IFIT WORKOUT Press the Map button, the Train button, or the Lose Wt. button to download the next workout of that You must have an iFit module to use an iFit workout. type in your schedule. To purchase an iFit module at any time, go to www.iFit.com or call the telephone number on the Press the Compete button to compete in a race...
Page 22
6. Follow your progress with the display. HOW TO USE THE CHARGING PORT See step 4 on page 17. The console features a charging port that you can use to charge USB-compatible devices, such as The My Trail tab will show a map of the trail or it will smartphones, while you exercise.
Page 23
HOW TO CHANGE CONSOLE SETTINGS To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. 1. Select the settings mode. Demo—The console features a display demo To select the settings mode, press the gear button. mode, designed to be used if the exercise bike is The settings information will appear in the display.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE HOW TO ADJUST THE DRIVE BELT Inspect and tighten all parts of the exercise bike If the pedals slip while you are pedaling, even while the regularly. Replace any worn parts immediately. resistance is adjusted to the highest setting, the drive belt may need to be adjusted.
Page 26
HOW TO ADJUST THE REED SWITCH Note: For clarity, the left shield cover is shown removed in the drawing below. If the console does not display correct feedback, the reed switch should be adjusted. Before you adjust Locate the Reed Switch (35). Rotate the Left Crank the reed switch, unplug the power adapter.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST Model No. PFEX15914.0 R1214A Key No. Qty. Description Key No. Qty. Description Frame M6 x 30mm Screw Front Stabilizer M4 x 25mm Screw Rear Stabilizer M5 x 20mm Screw Upright M10 x 55mm Screw Console Resistance Motor Screw...
Page 29
Key No. Qty. Description Key No. Qty. Description M10 x 60mm Bolt M10 x 96mm Screw M8 Locknut M4 x 30mm Screw M6 x 15mm Screw M6 Washer Crank Snap Ring M8 Hex Nut Crank Tablet Holder Frame Cap #8 x 19mm Screw Power Adapter –...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...